Comset CM820V-W, User Manual

Page: 40 / 86

CM820V-W User Manual
40
www.comset.com.au
3.5.6 GPS (optional)

Enable : Check this button to enable GPS.

Only GPRMC: If checked, it will only send GPRMC data info (Longitude Latitude altitude)

Prefix SN No.: If checked, it will add the router’s SN to the data packet.

Send interval: Set the frequency of GPS data packets being sent.

GPS Send to : Choose between “Serial” and “TCP/IP”. The router will only receive the GPS
signal and will not process it. It will send this GPS signal to your GPS processor devices or
servers. If the GPS processor device is connected to the CM820V-W Router via a Serial Port,
please choose “Serial”.
If the GPS processor device is a remote server, please choose “Serial”.
GPS to TCP/UDP Settings

Server IP : Fill in the correct destination server IP or domain name.

Server port : Fill in the correct destination server port.