CM820V-W User Manual
29
www.comset.com.au
settings” is checked, which means the existing configuration will be kept after the system upgrade,
otherwise the router will be reset to factory settings. We recommend to un-check “Keep settings”
to prevent conflicting parameters after the firmware upgrade.
Click the button “Choose File” and select a compatible firmware, then click the button “Upload
image”. The router will run a basic check of the file. If it is an incompatible file, an error message
will appear like this one below:
If the firmware file is ok, a verification message will appear. Click the button “Proceed”, and the
system will restart after a few minutes.
