Comset CM685VX, User Manual

Page: 48 / 108

CM685VX User Manual
48
www.comset.com.au
 Get Cell Status Command : Input the command for “router cell status” operation, default is
“cellstatus”.
 Set cell link-up Command : Input the command for “router cell link up” operation, default is
“cellup”. If the router gets this command, the Router Cell will go online.
 Set cell link-down Command : Input the command for “router cell link down” operation,
default is “celldown”. If the router gets this command, the Router Cell will go offline.
 DIO_0 Set Command : Input the command for I/O port 0. For SMS feature, please keep the
default parameters.
 DIO_0 Reset Command : Input the command for I/O port 0. For SMS feature, please keep
the default parameters.
 DIO_1 Set Command : Input the command for I/O port 1. For SMS feature, please keep the
default parameters.
 DIO_1 Reset Command : Input the command for I/O port 1. For SMS feature, please keep
the default parameters.
 DIO Status Command : Input the command for I/O port status. For SMS feature, please keep
the default parameters.
 Wifi on Command : input the command for turning on WiFi. For SMS feature, please keep
the default parameters.
 Wifi off Command : input the command for turning off WiFi. For SMS feature, please keep
the default parameters.
 SMS alarm
 SMS Alarm : Enable the SMS alarm feature.
 Enable Signal Quality Alarm : Enable Signal Quality Alarm feature.
 Signal Quality Threshold : Set the signal quality threshold.