Comset CM685VX, User Manual

Page: 100 / 108

CM685VX User Manual
100
www.comset.com.au
3.6.9 Static Routes
 Interface: You can choose the corresponding interface type.
 Target: The destination host IP or network.
 IPv4-Netmask: The destination IP netmask.
 IPv4-Gateway: IP address of the next hop.
 Metric: Used by the router to make routing decisions.
 MTU: Maximum transmission unit.
 Table: The route table ID. The default value is 254. Valid table ID 1-254.
Note:

The Gateway and LAN IP of this router must belong to the same network segment.

If the destination IP address is that of a host, then the Netmask must be 255.255.255.255.

If the destination IP address is an IP network segment, it must match with the Netmask.
For example, if the destination IP is 10.0.0.0, and the Netmask is 255.0.0.0.