Comset CM550W-POE 5G Router User
Guide
70
https://www.comset.com.au
2.9.12
Firmware upgrade
Step 1 Go to “Administration>Upgrade” to open upgrade firmware tab.
Figure 3-1
Firmware Upgrade GUI
Do not disconnect the power during upgrade. The upgrade takes about 4
minutes to complete.
2.10
“Reset” Button to Restore Factory Settings
If you can’t access the GUI interface, you can perform a hardware reset. Press and hold
the “Reset” button for 12 seconds then release. The system will be restored to factory
default settings.
Table 2-33 System Default Instructions
Item
Default settings
LAN IP
192.168.1.1
LAN Subnet Mask
255.255.255.0
DHCP server
Enabled
Summary of Contents for CM550W-POE
