Comset CM550W-POE, User Manual

Page: 66 / 104

Comset CM550W-POE 5G Router User
Guide
64
https://www.comset.com.au
Item Description
pulse shape are not at the same level, the CM550W-POE will trigger an
alarm according to the Counter Action settings.
Counter Trigger
Available when the DI is under Event Counter mode.
Input from 0 to 100. “0” means the alarm is not triggered.
The alarm will be triggered when the counter reaches the set value.
After the alarm is triggered, the DI will keep counting but will not
trigger the alarm again.
Counter Period This is a reachable IP address. Once the ICMP check fails, GRE will
be re-established.
Counter
Recover It will re-count after a counter trigger alarm. The value is
0~30000(*100ms). “0” means no counter.
Counter Action
HI_TO_LO and LO_TO_HI is available when the DI is
under Event Counter mode.
In Event Counter mode, the channel accepts limit or proximity
switches and counts events according to the ON/OFF status. When
LO_TO_HI is selected, the counter value increases when the
attached switch is pushed. When HI_TO_LO is selected, the counter
value increases when the switch is pushed and released.
Counter Start Available when the DI is under EVENT_COUNTER mode. The
counting starts when you enable this feature.
SMS Alarm The alarm SMS will send a text to a specified phone group. Each
phone group contains up to 2 phone numbers.
SMS Content 70 ASCII Char Max.
Number 1 SMS receiver phone number.
Number 2 SMS receiver phone number.
Step 2 Click ”Save” to finish.
OFF Mode
DI from high level 3.3~5V to low level 0V will be triggered.