Comset CM550W-POE, User Manual

Page: 33 / 104

Comset CM550W-POE 5G Router User
Guide
31
https://www.comset.com.au
Table 2-11 IP Passthrough Instructions
Item Instructions
Enable Enable IP Pass-through
MAC Address Enable DHCP of device. Configure device Mac.
Device will be assigned a SIM IP.
Gateway If CM550W-POE is connected to multiple devices, input
other devices gateway.
Step 2 Click ”save” to finish
2.6.5
Triggered Port Forwarding Settings
Step 1 Go to Advanced Network> Triggered, to check or modify the relevant parameters.
Table 2-12 Triggered Instructions
Item Instructions
Protocol Support UDP, TCP, both UDP and TCP.
Trigger Ports Trigger Ports are the initial LAN to WAN "trigger".
Transferred
Ports Forwarded Ports are the WAN to LAN ports that are
opened if the "trigger" is activated.
Note Port triggering opens an incoming port when your
computer is using a specified outgoing port for specific
traffic.
Step 2 Click ”save” to finish.