Compuprint PageMaster 450, User Manual

Page: 197 / 202

Sep 01
Compuprint Page Master 450 User Guide D-3
Server Commands
Server Commands
Frequently-used Server Commands
Command Option(s) Description
DEFINE SERVER BOOTP {EN|DIS} Enables or disables querying for a BOOTP
host at system boot time.
DEFINE SERVER DHCP {EN|DIS} Enables or disables querying for a DHCP
host at system boot time.
DEFINE SERVER GATEWAY ipaddress Specifies the host to be used as a TCP/IP
gateway to forward packets between
networks. Enter an IP address.
DEFINE SERVER
INCOMING
option
BOTH Enables incoming LAT and Telnet
connections.
LAT Enables only incoming LAT connections.
NONE Disables incoming connections.
TELNET Enables only incoming Telnet connections.
PASSWORD Causes the server to prompt for a password
for all incoming connections.
NOPASSWORD Allows connections to be established
without prompting for a password.
DEFINE SERVER IPADDRESS ipaddress Sets the Server’s network IP address.
DEFINE SERVER LOADHOST ipaddress Specifies the TCP/IP host from which the
Server requests its run-time code.
DEFINE SERVER LOGIN PASSWORD Sets a new password that will be required
before incoming logins are accepted. You
will be prompted for the new password (up
to 6 alphanumeric characters,
case-insensitive).
DEFINE SERVER NAME “ newname ” Specifies a new name for the Server.
Names are restricted in length; generally a
name of 11 or fewer characters is
permissible.
DEFINE SERVER NETWARE LOADHOST server Specifies the NetWare host from which the
Server requests its run-time code. Enter a
file server name of up to 11 characters.
DEFINE SERVER PRIVILEGED PASSWORD Sets a new password that will be required
for privileged user status. You will be
prompted for the new password (up to 6
alphanumeric characters, case-insensitive).
DEFINE SERVER RARP {EN|DIS} Enables or disables querying for a RARP
host at system boot time.