Compuprint PageMaster 450 User Manual Download Page 111

Page: 111 / 202

Sep 01

Compuprint PageMaster 450 User Guide

5-9

Replacing the EP cartridge (when options are installed)

Open the front cover as indicated.

Remove the EP cartridge. Lift the orange handle lever on the cartridge to gently take it out. Then hold

the handle and completely remove the cartridge. Be careful about the toner falling out, then wrap the

used EP cartridge in its original packing and dispose it properly. Never dispose of it by burning.

Never touch the fuser area where a label indicating high temperature is located (such as
that shown below), or else burns may result.

Summary of Contents for PageMaster 450











































































































































































































Search results

Summary of Contents for PageMaster 450

Reviews:

Related manuals for PageMaster 450

Brands by name

Popular brands

Compuprint PageMaster 450, User Manual

Search results

Summary of Contents for PageMaster 450

Reviews:

Related manuals for PageMaster 450

Brands by name

Popular brands