background image

 

 

15 

 

WARRANTY COMPULOAD CL2000 

 

THE COMPULOAD HAS NO USER SERVICEABLE COMPONENTS INSIDE. DO NOT 
ATTEMPT TO DISMANTLE THE UNIT AS THIS WILL CAUSE YOUR WARRANTY TO 
BECOME NULL AND VOID. 
 

ATLAS  WEIGHING  Pty.  Ltd.  warrants  the  COMPULOAD  Series  load  weighing  gauge  and 
any  optional  equipment  to  be  free  of  defects  in  workmanship  and  material  for  a  period  of 
twelve (12) months from date of dispatch or installation, (whichever is applicable). 
 
This  Warranty  only  applies  provided  the  COMPULOAD  and  accessories  are  used  in 
accordance with the recommendations of ATLAS WEIGHING Pty. Ltd. under normal use and 
reasonable care. 
 
The warranty does not cover damage in any way whatsoever including transit damage. The 
warranty does not cover malfunction or failure resulting from misuse, neglect or abuse. 
 
The warranty immediately becomes void should any repairs, alterations or modifications are 
carried out or attempted to be carried out by other than ATLAS WEIGHING Pty. Ltd.  
 
The warranty is not transferable and applies only to the original purchaser unless authorised 
by ATLAS WEIGHING Pty. Ltd. 
 
The warranty does not include travel expenses should a factory engineer or  representative 
be required to perform repairs on site. 
 
At the option of ATLAS WEIGHING Pty. Ltd. any faulty units or components will be repaired 
or replaced free of charge whilst within the warranty period providing the unit or component 
is returned to our premises with freight pre-paid. 
 
Our factory engineers will offer all possible assistance to rectify any difficulties experienced 
in the field.  The larger majority of problems can be overcome by telephone.  Please contact 
our office prior to forwarding any units or components for attention 
 
NOTE:  Our carrier does not accept responsibility for loss or damage in transit.  Should transit 
or freight loss or damage insurance be required it must be indicated on your order and the 
cost of such insurance will be charged accordingly. 
 
 
 

Summary of Contents for CL2000MKII
















Reviews: