Compu Pool E-Series Manual
19
8.5.11
Figure 3: Terminal Wiring Diagram
9.0 INSTALLATION CHECKLIST
9.1.1
Plumbing work completed as per the provided plumbing diagram.
9.1.2
All valves working and assembled correctly.
9.1.3
All valves and joints checked for correct hydrostatic sealing with no leaks.
9.1.4
Power and control input wired correctly as per the provided terminal diagram.
9.1.5
Earth wire correctly grounded to the earth terminal.
9.1.6
Cell lead connections are tight.
9.1.7
Cell Module locking collar is tight.
9.1.8
Circuit breakers are working correctly.
9.1.9
Sufficient salt has previously been added and fully dissolved into pool water.
10.0 USING THE CONTROL PANEL
10.1 Control Panel Buttons
1. On / Off.
For normal operation, the system should be left in the “On” position. In
this position the Compu Pool E-Series will produce chlorine according to the
desired output %. Simply press the button again to turn the unit off.
WARNING: Off does not electrically isolate the Power Module, the fans will
operate when Off.
2. Select Button.
Pressing this button will open the menu that provides the following
options:
1
2
5
6
3
4
2:24PM MON 100%
▓
▓
▓
▓
▓
▓
▓
▓
▓
▓
▓
▓
▓
▓
