VideoMate V200/V200F TV Box Using Guide
Using at the first time
Please refer to the above for correct setup to use V200/V200F TV box. After
you have connected the power adaptor, you can press the power switch to turn
on the TV box and you will see the green LED light beside the power button.
The default TV settings will be your local country and TV system, and you can
change it from OSD menu later. Now you may enjoy the TV shows on your
monitor.
If you have connect V200/V200F TV box to your computer’s video card, press
the power button on the TV box to switch between TV and PC signal.
Order of the Sources: TV
Æ
AV (Composite)
Æ
S-Video
Æ
FM
Æ
TV
…
VideoMate V200/V200F TV Box supports 60 and 75 Hz with 9 resolutions from
below. The default setting is 1024*768 @ 60Hz.
Resolution 1 -> 640*480 (4:3)
Resolution 6 -> 1400*1050 (4:3)
Resolution 2 -> 800*600 (4:3)
Resolution 7 -> 1440*900 (16:10)
Resolution 3 -> 1024*768 (4:3)
Resolution 8 -> 1600*1200 (4:3)
Resolution 4 -> 1280*720 (16:9)
Resolution 9 -> 1680*1050 (16:10)
Resolution 5 -> 1280*1024 (5:4)
To change resolution, please open up menu and select the resolution you want.
Refer to later instruction for more detail. “Resolution” button from the remote
controller can also switch the resolution.
If using PIP feature, the refresh rates in Windows support resolutions below:
Support Refresh Rate
Resolution
60 Hz
70 Hz
72 Hz
75 Hz
640 x 480
Yes
-
Yes
Yes
800 x 600
Yes
-
Yes
Yes
1024 x 768
Yes
Yes
Yes
Yes
1152 x 864
Yes
Yes
-
Yes
1280 x 1024
Yes
Yes
Yes
Yes
1280 x 720
Yes
Yes
Yes
Yes
1440 x 900
Yes
Yes
Yes
Yes
1400 x 1050
Yes
Yes
Yes
Yes
1600 x 1200
Yes
-
Yes
Yes
1680 x 1050
Yes
No
No
No
