4
Installation
Start the computer. Make sure
VideoMate U3
is connected to your computer
and insert the installation CD into your CD drive.
Step 1. Windows will detect a new device and start the Add/Remove
Hardware Wizard. Please press
Cancel
and go to the next step.
Step 2. Insert the installation CD into your CD drive. If you have Autorun
enabled, the installer will start automatically. (If Autorun is disabled,
double-click on “setup.exe” on the installation CD.) You can choose
Complete
to install all necessary software (VideoMate U3 drivers,
ComproDTV, ComproDVD, Ulead PhotoExplore 8.5 SE) or choose
Custom
to select item by item. Compro recommends you choose
Complete
.
Step 3. If you see the Windows Logo testing message, below, please press
“Continue Anyway” to proceed.
Step 4. Press
Next
to install ComproDTV, ComproDVD, Ulead PhotoExplore
8.5 SE.
Step 5. After each program is successfully installed, press
Finish
to proceed.
Step 6. When installation completes, press
Finish
to restart computer.
Step 7. Connect TV signal.
Step 8. Open ComproDTV to enjoy the show.
Continue Anyway
