COMPRO TN30, User Manual, Page: 15 / 64

3-5 Connect the Cables Connect the Cables
Chapter 3: Installation
To begin setup, insert the installation CD into your CD-ROM drive, and the iWizard will start automatically.
Note:
If Autorun has been disabled in your computer, please browse the
contents of the installation CD and double-click on the "iWizard.exe"
file to run the setup wizard.
1. Select the language for installation
network camera.
Figure 3-3. Language selection
2. Select your camera from the list, and
wait until the live video and camera
information are displayed on the right. (You
can double-check the device name and
the MAC ID which are printed on the serial
number sticker on the back of the camera
and on the package). Click [Next] when
you’re ready .
Figure 3-4. Camera selection
3. The default password is `admin.’ Enter a
new password here (please note down
your new password). You can also click
[Next] to skip this process.
Figure 3-5. Password setup