COMPRO TN30, User Manual, Page: 14 / 64

3-4 Connect the Cables Connect the Cables
Compro TN30/TN30W Network Camera
Setup Network Camera from PC and Installation CD
Figure 3-2. Connection of cables
Connect an Ethernet cable between your PC and your network switch/router.
Connect an Ethernet cable between your network camera and your network switch/router.
Attach the power adapter to the camera’s power connector and connect the power plug to a power
outlet. When it power on successfully, the LED indicator will shows blue light.
Complete the cable connection, we provide 2 ways to add your camera:
• Login to C4Home website (www.c4home.com) and add camera to the list. C4Home website not
support the wireless setup of network camera. Please use C4Home app or installation CD for
wireless setup.
• Insert the installation CD to your CD/DVD drive, and running the iWizard.exe to install IP camera.
Caution!
• When you unplug the power plug from the wall outlet while the
camera is still in operation, wait for 4 seconds before plugging the
power plug back in the wall outlet. And avoid too frequent plugging
and unplugging of power cable.
• If the power cable and the network cable connected to the camera are
not securely fastened, it could lead to unstable connection.
Note:
You can add more Compro cloud network camera to your account
for management. C4Home app allow maximum 16 network cameras
installed.