21
For best performance, no device should share an IRQ with the VideoMate
S350 PCI card card.
If another device shares an IRQ with the TV tuner card, you should move the
PCI TV Tuner card to another PCI slot. Pay attention to the IRQ numbers of
networking, sound, and SCSI cards. They should not share IRQs with the TV
tuner card
My system cannot Power Up, What should I do?
First, make sure you have connected the Power Up circuit correctly. Please
refer the hardware installation section for more information.
Second, Power Up will start your computer 5 minutes in advance of the
schedule time. If you set the schedule on 4 o’clock, Power up will wake up your
computer at 3:55. Therefore, you need to shut down the computer before 3:54
in order to let Power Up start the computer.
Third, some motherboards BIOS have an option “
Wake up by PME# or PCI.
”
This option must be ENABLED to use Power Up function.
Finally, it is possible that your power supply doesn’t provide the standard 3.3V
standby power. Therefore, changing your power supply might help.
The recorded file from VCR has no sound?
Please plug VCR Composite video cable
(yellow) into TV card yellow connector.
Composite
Audio
needs to connect to the
Line-In port of your sound card. You have to
buy a converter (see the right) to transfer
Composite Audio cable (red one and white
one) into stereo. Choose Line-In to be your
Recording Mixer in the Device System in Settings of ComrpoDTV.
How can I record as a different video format?
Digital program is a fixed MPEG-II format file already. ComproDTV can’t
change it and will save it into hard disk directly. Only Analog TV, Composite or
S-Video input video can be software encode to your choice of video format.
You can do that in the Record tab in Settings of ComproDTV 2.
