Compr
o CP480 - U
ser's Guide
Compr
o CP480 - U
ser's Guide
6 Installation & Connections
Installing Bracket
The camera comes with a wall bracket in the package. The following describes how to
secure the bracket to the camera body.
1.
Thread the terminal cable through the holder bracket's hole and then secure
the holder bracket to the bottom of the camera by fixing a hexagonal screw into
screw hole 1 and 2. Make sure you use two washers in between the screws and
the holder bracket to avoid possible damage to the camera.
2
1
Holder Bracket
2.
Place the rubber spacer between the camera and the mount to provide
insulation. Then thread the camera's terminal cable through the tilt table's hole
(labelld ) and out the hole on the side of mount base (labelld ). Then use
four hexagonal screws to fasten the mount to the holder bracket.
2
1
Rubber Spacer
Tilt Table
Connecting Video and Power
1. Use a BNC video cable to connect the terminal BNC connector from the camera
to a mating BNC connector.
2. Attach the power adapter (optional accessory) to the terminal power connector
