background image

Compr

o CP480 - U

ser's Guide

Compr

o CP480 - U

ser's Guide

2 Important Notices

Regulatory Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) This device 
must accept any interference received, including interference that may cause undesired 
operation.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one of the following 
measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved 
by the party responsible for compliance could void the user's authority to operate this 
equipment.

Safety Rules

•  The camera ought to be installed by a qualified technician.
•  Place the camera on a level surface whenever possible.
•  Do not drop the camera body to the ground; it may cause the damage to main parts.
•  Please do not disassemble or remodel the product; it may cause damage or fire.
•  Do not shake, move or disturb the camera when it is in operation, as such actions 

may result in the malfunction of the device.

•  Power off the camera as soon as it is found smoking or smelt unusual.
•  Please do not place the camera around the heat sources, such as television or 

microwave oven.

Important Notices

Summary of Contents for CP480





















Reviews: