Using
ComproPVR
39
wake up the computer from Shutdown or Stand by states
for scheduled recording.
This option is available only if your hardware supports
Power Up Scheduling.
Power Up will start your computer 5 minutes in advance
of the scheduled time. If you set schedule to 4 o’clock,
Power up will wake up your computer at 3:55. Therefore,
you need to shut down the computer before 3:54 in order
to let Power Up start the computer.
There are three possible actions after recording is
complete:
Shut down the system:
After recording, shut down
the system.
System stand by:
After recording, put computer in
stand by mode.
Keep system power on:
After recording, do not
shutdown system.
Enable automatic logon:
When using Power Up
Scheduling, ComproPVR will start Windows. If Windows
requires you to enter a username and password during
start up, you should check this box and enter the
required information.
This option will be grayed out if your hardware doesn’t
support Power Up Scheduling.
If “Enable automatic logon” is checked, you will see a
popup window.
