P
age 11
2. HDMI OUT: HDMI output port.
This slot is where you connect
the HDTV or monitor with HDMI cable
3. ETHERNET: This slot provide Internet signal from transmitter
or to transmitter.
4. RS232: Phoenix jack provide Serial port control signal from
transmitter or to transmitter.
5. DC IN: Plug the 24V DC power supply into the unit.
6. IR RX: Chanel 2 IR Receiver.
Connect with Wideband IR Rx.
7. IR TX: Chanel 1 IR Transmitter. Connect with Wideband IR Tx.
8. LINK LED: The connection status indicating lamp.
※
Illuminate: The Transmitter and Receiver is good connections.
※
Flashing: The Transmitter and Receiver is poor connections.
※
Dark: The Transmitter and Receiver is no connections.
9. HDBaseT IN: Standard HDBaseT signal input port. Connect
HDBaseT transmitter with a UTP cable follows the standard of
IEEE-568B.
10. DATA LED: The data status indicating lamp.
※
Illuminate: The HDMI signal with HDCP.
※
Flashing: The HDMI signal without HDCP.
※
Dark: No HDMI signal.
9. PC controller user guide
Installation
Switcher controller is a green software. Just copy SwitcherController.exe
to PC which is used to control the Switcher by RS232 COM port or TCP/IP
to complete installation.
Preparation
Connect PC and Switcher by RS232 cable (headers of both sides of
cable should be FEMALE) or TCP/IP(local area network)
Power-up Switcher
Double click SwitcherController.exe icon to run it
