4
ST
6.2
Transmitter's Rear Panel
DC 48V:
Plug the 48V DC power adapter into this port and connect
it to an AC wall outlet for power.
IR1 BLASTER:
Connect to the provided IR Blaster to transmit IR
signals to devices within direct line-of-sight of the IR Blaster.
IR2 EXTENDER:
Connect to the provided IR Extender to extend
the IR control range of remotely located devices. Ensure that the
remote being used is within direct line-of-sight of the IR Extender.
CAT5e/6/7 OUT:
Connect to a compatible HDBaseT Receiver with
a single Cat.5e/6/7 cable for transmission of all data signals.
HDMI IN:
Connect to HDMI source equipment such as a media
player, game console or set-top box.
6.3
Receiver's Front Panel
ISP:
This button is reserved for factory use only.
STD/UPDATE:
This switch is reserved for factory use only. The default
setting is “STD”.
RS-232 OUT:
Connect to a serial controllable device for the
extension of RS-232 signals.
LAN:
Connect to an Ethernet supporting device or to your local
network, as appropriate, to extend the network to both ends of
the HDBaseT connection.
SYNC LED:
This LED will illuminate when a live input source is
detected.
IR
1
IR
2
LAN HQ/STD
LINK
