5
HQ/STD LED:
This LED will illuminate whenever the AVLC function
is active. A green LED indicates that AVLC is in HQ (High Quality)
mode. A red LED indicates that AVLC is in STD (Standard) mode.
POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
LINK LED:
This LED will illuminate solidly when a live connection with
a compatible Receiver is active. The LED will blink with a regular
pattern if a Receiver is connected but there is not currently a live
signal. The LED will blink with an irregular pattern if a connection
error has occurred.
6.4
Receiver's Rear Panel
IR2 BLASTER:
Connect to the provided IR Blaster to transmit IR
signals to devices within direct line-of-sight of the IR Blaster.
IR1 EXTENDER:
Connect to the provided IR Extender to extend
the IR control range of remotely located devices. Ensure that the
remote being used is within direct line-of-sight of the IR Extender.
CAT5e/6/7:
Connect to a compatible HDBaseT Transmitter with a
single Cat.5e/6/7 cable for transmission of all data signals.
HDMI OUT:
Connect to an HDMI TV, monitor or amplifier for digital
video and audio output.
IR
2
IR
1
