background image

 
 
 

 

 

To Help Prevent Injuries from Falls & Other Hazards 

 
 
 
1. Never attach, or allow children to attach the following items to your swing set: Ropes, jump 
ropes, clotheslines, pet leashes or any similar type of item to your swing set. Any item such as 
these may present a strangulation hazard.  
 
2. Periodically ins

pect all nuts, bolts, set screws, clevis, and carabineer or “S” hooks. Make 

certain that these are functionally safe and secure. If you have any doubt as to the safety and 
security of any connector or fastener, replace it.  

 
2a. You should periodically check the brass bushings in the swing hangers. Look for 
excessive wear in the bushing and replace as necessary. 
 
 2b. If your playground has a tire swing: The tire swing knuckle should be lubricated 
twice annually to prevent wear. 

 
 3. Never allow children to wear bicycle helmets when using playground equipment. 
 
 

4. Remove drawstrings from hoodie’s and jackets. Remove attached mittens and gloves. These 

can become entangled with the equipment and present the risk of strangulation or other 
hazards.  
 
5. Playground surfaces can become hot in the sun. Children should be required to wear shoes 
and socks when using this or any playground equipment.  
 
6. Check for and remove sharp points or edges in the playground equipment.  
 
7. Remove tripping hazards from the playground area. Items such as exposed concrete 
footings, tree stumps, rocks or any item that may be present in your space that a child could trip 
over while playing should be removed.  
 
8. Regularly check the play equipment and the surfacing surrounding it to be certain that both 
are in good condition.  
 
9. Parental Supervision is recommended. The best ingredient for a safe playground is good 
parental supervision while the kids are using the equipment.  
 
10. Remember to play safely, take turns, share with each other and have fun!  

 

 

 

Summary of Contents for Swing Set PH35-10

































Reviews: