Assembling Ladders and Attaching to deck support structure
3.a. Make a mark 108” up from the bottom of the ladder onto each ladder rail. Move the adjustable sleeves to
these marks and position them to receive the horizontal ladder by turning them to point at a 90 degree angle
(towards what will become the inside of the Horizontal ladder section of the structure.) Secure the set screws.
Notice Direction of the rungs on the ladders:
The Ladder without
the holes drilled
has the rungs
facing down.
The ladder with the
holes drilled has the
rungs facing up.
108
”
½” to 1” Gap between the
vertical ladder rails and the
horizontal
Secure set
screws
Summary of Contents for Swing Set PH35-10
Page 24: ......
