Installation drawing
Suggested positioning*
* If to be installed above glossy (stainless steel) surfaces, the
distance from sensor window to surface must
be over 35cm.
Installation guide
1.
Unpack and position the wall bracket vertically against the wall and mark the
drill hole positions. Drill 3x Ø6mm holes and put the plastic plugs into these
holes.
2.
Position the wall bracket and fix it to the wall with the screws supplied.
3.
Position the dispenser onto the wall bracket.
4.
Push the dispenser downwards, make sure it fits into the hook tightly.
5.
Secure the dispenser on the wall bracket with the set screw.
6.
Close the dispenser with the top cover and lock it with the key.
5
6
