Replacing batteries
1.
The Led indicator flashes continuously when battery life is ending.
2.
Please change batteries at this time.
3.
Select 6 AA alkaline batteries, new and old batteries can't be used
together.
4.
Open the battery box cover, remove the batteries and replace all
batteries with new ones.
5.
Please make sure you install the batteries in the right direction, the + and
- side are indicated in the battery holder.
6.
Re-position the battery box (take especial care not to pinch the cable),
put the battery box cover back in place and tighten the screws.
7.
Follow the instructions for setting the sensor range and volume of liquid
if required.
Wall bracket dimensions
84,5mm
3,33
~ 205mm
8,07in
f
80mm
3,14in
•
Unplug the cable and
remove the battery box
cover.
•
Remove the old
batteries and
replace with new
ones.
•
Put the battery into the
battery box according
"+" & "-" direction.
58mm
2,28in
28,5mm
1,12in
7
4
