20
Section 6
Maintenance and Calibration
Service Information
The MegaPulse 1.2x50-16PF PV tester is warranted to the original purchaser for a period of 1
year. This warranty does not cover problems due to misuse or neglect. Malfunctions which
occur within the limits of the warranty will be corrected at no charge. Mail the instrument post
paid to the manufacturer. Dated proof of purchase is required for all in-warranty repairs. The
manufacturer is also available for calibration and / or repair of instruments that are beyond their
warranty period. Contact the manufacturer for a cost quotation. Ship the instrument and your
remittance according to the instructions given by the manufacturer.
Calibration Information
The Megapulse 1.2x50-16PF PV has been fully calibrated at the factory in accordance to our
published specifications. It is recommended that you have this instrument re-calibrated and safety
check done at least once per year. The procedure consists on internal components tolerance
verification and calibrating the meter reading to agree with the capacitor bank.
The Calibration procedure must be performed by qualified personnel. Contact Compliance West
USA for the latest calibration procedure. Have ready the serial number of the Megapulse 1.2x50-
16PF PV tester.
Technical Assistance
Technical Assistance from Compliance West USA is available:
Phone:
(800) 748-6224
Hours:
8:00 AM - 4:00 PM Pacific Time.
Also available on our web site at:
www.compwest.com
Contact:
Compliance West USA
650 Gateway Center Way, Suite D
San Diego, CA., 92102
United States of America.
Phone:
(619) 878-9696
FAX
: (619) 794-0404
