Chapter 2
Let’s Get Going - Hardware Setup
14
Connect the RJ45 Ethernet cable attached to the Compex PoE Injector (not
provided) to a network device, such as to a switch or to the PC you will use to
configure the WPP54.
Connect the power adapter in the Compex PoE kit (not provided) to the main
electrical supply and the power plug into the socket of the injector.
Now, turn on your power supply. Notice that the POWER LED has lighted up.
This indicates that the WPP54 is receiving power through the Compex PoE
Injector and that connection between Compex WPP54 and your network has
been established.
Note:
Please use the power adapter in the Compex PoE kit (not provided). Using a
power adapter with a different voltage rating will damage this product.
