Chapter 7
Configuring Network Application
153
Now, move your webcam station to your living room. You can now view your
webcam from the login page or from the View Webcam option in the Configuration
Command menu.
Since you are using a tracker pod for your webcam for your living room, you can
easily adjust the position of your webcam by clicking on the Left, Up, Center, Down or
Right button.
Verify connection between Router #1 and Router #2
To ensure that your connection between the two routers has established successfully,
simply go to your MS-DOS Prompt, type in
ping 192.168.168.101 -t
where 192.168.168.101 is the IP address for your Router #2.
Once you received the message as shown below, this shows that the connection
between the two routers has established successfully!
