Compass Model SPORT X, Assembly Manual

Page: 14 / 32

By adjusting the Links between Swashplate and Mixing Arms set the Mixing Arms to a 5° downward position.
Adjust the Links between the Mixing Arms and the Main Blade Holder to set the Main Blade Pitch to 0°.
D
C
At the low throttle stick and throttle trim, the carburetor hole should be completely close. At full throttle stick,
carburetor hole should be completely open. Adjust the ATV in radio, or/and the control horn position on the
engine to achieve above requirement. Make sure the servo does not bind at any traveling point.
E
F
0 Pitch °
Mixing Arm
5
°
Full
open
Full
close
Full
Throttle
Lowest
Throttle
90°
Washout Arm
Swashplate
Horizontal 06-0501 Swashplate
Tool
Horizontal
Level the Swashplate by adjusting the links from the Servo Arms to the Swashplate. Use a Compass
Swashplate Tool as guide. Then set level the Washout Arms.
At Rudder Middle Stick, Set Rudder Servo 90 degree to the tail link And Set Tail Blade to 7 deg Pitch.