G At the low throttle stick and the throttle trim
the carburetor hole should be completely close. At
full throttle stick, carburetor hole should be
completely open. Adjust the ATV in radio, or/and the
control horn position on the engine to achieve above
requirement. Make sure the servo does not bind at
any traveling point.
)
,
，。
，。 !"。
H)At Rudder Middle Stick, Set Rudder Servo 90 degree to the tail link And Set Tail Blade to 7 deg Pitch.
#$%&'(,*+$-./01$23905,6$78:;75.
Turn on the radio
position the heli tail point to yourself
,
.
Make sure radio is set to 120 degree CCPM
mode
Move the stick and check the reaction of the Swash Plate
Throttle and Tail Pitch Plate
Adjust
radio settings accordingly
120
ccpm
.
,
.
.
>?,@AB.$CD&EF.GH@?*;
5
IJ. KLM/NOPQR-.SN
TUVW.
Aileron Check
XYOP
Mod 1
Mod 2
Swash Plate Reaction
Z[\]
Elevator Check
B^OP
Tilt
_`
Forward
Tilt Left
a`
Tilt Right
b`
Tilt
c`
Backward
12
Servo Direction Check/
7
°
