A) Turn on the radio, set throttle to middle position for 0 degree. Use the subtrim in radio program
to adjust all the servo to get control horn to the right angle.
SUBTRIM”
,0 ,.“
!"#
$。
Note: The 2 Push-pull link rods are not
necessarily parallel, but must be the
same length.
&':()*+-/
123,45/1/6.
1
8
0
°
B)Next is to adjust the link from servo to the T Arm and I Arm so that the T Arm is Horizontal and the
Inner Arm is Horizontal. Use the 2 Guide Holes on the frame to make sure the 2 Arms are Horizontal.
T
T
"/7,8+5 9;<=>;?2. @ABCDEFGHI 9;<=>;JK?2.
Horizontal
?2
Inner Arm
=>;
Guide Holes
EFG
T Arm
T9;
I Arm
I 9;
c)Next adjust the links from T Arms to Swash Plate
to level Swash Plate. A compass Swash Plate Tool
can be applied here as a guide.
T
8 9;Q?2RSU+?2R?2.V7W@
AX?2RYZ[\]^.
Washout Arm
?2R;
SwashPlate
?2R
Horizontal
?2
06-0501 Swash Plate
Tool
?2RYZ
Horizontal
?2
D)Set theWashout Arms horizontal.
?2R;\?2.
3
°
E)Mixing Arm is set 3deg down to the flybar.
_
`;\3bcfg
Flybar
cfg
Mixing Arm
_`;
F) Install the main blade and set it to 0 deg pitch.
hjk\0 .
