Connection
Connecting the Power Cord
The internal power supply will support 100 - 240 VAC (Auto Sensing). The power
cord shipped with the router is a 120 VAC three-conductor power cord for use in the
United States and Canada. If the router is being installed outside the United States or
Canada, the appropriate power cord should be purchased.
To connect the power cord to the router:
1.
Connect the power cord to the power connector on the back-side of the router.
2.
Connect the power cord to a grounded voltage source.
Fibre Channel
LVD/SE SCSl
0
1
Ethernet
Serial
Pwr.
Link/
Act
Figure 3-1: Power connector
WARNING: To reduce the risk of electric shock or damage to the equipment:
•
Do not disable the power-cord grounding plug. The grounding plug is an
important safety feature.
•
Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
•
Disconnect power from the router by unplugging the power cord from
either the electrical outlet or the router.
3-2
Network Storage Router N1200 Installation Guide
COMPAQ CONFIDENTIAL
Writer: Mark Garza File Name: d-ch3 Connection.doc
Codename: Myst-Riven Part Number: 283394-002 Last Saved On: 4/26/02 3:01 PM
