Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
4-19
COMPAQ CONFIDENTIAL
Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
Configuring Multicast Filtering
When you select
Multicast Filtering
from the
Static Filtering Table
menu, the following
screen is displayed.
The
Add Multicast Filtering
window allows you to set up multicast filtering on the GbE
Interconnect Switch.
You can change the following parameters:
•
MAC Address
—Type the MAC address of the static source of multicast packets.
•
VID
—Type the VID number of the VLAN to which the MAC address belongs.
•
Type
—Choose the filter type, either
Permanent
or
DeleteOnReset.
•
Port Map
—Select the ports that will be members of the static multicast group and ports
that have no restrictions from joining dynamically.
Click
Apply
after making changes to the settings.
NOTE:
To save the configuration settings permanently, you must enter them into NVRAM using the
Save Changes
option on the
Maintenance
menu. Refer to the section, “Saving Changes,” earlier in
this chapter.
Configuring the Static VLAN Entry
The
VLAN
menu allows you to configure the following:
•
Static VLAN entry
•
Port VLAN ID (PVID)
