Initial Configuration of the Switch
2-10
Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: c-ch2 Initial Configuration of the Switch.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:46 AM
Accessing Management Parameters
Select option
3. Management settings
in the main menu to call up the Management
Settings Menu, which is shown in Figure 2-6.
Unlike the Network Parameters menu, changes made in this menu become effective
as soon as they are made. There is no need to reset the switch.
Figure 2-6: Management Options menu
Options include:
1. Return to main menu
allows the user to return to the main menu.
2. Set SNMP get community string
calls up the SNMP Get Community Name
menu. This allows the user to restore the default SNMP get community name or to
enter a new SNMP get community name.
3. Set SNMP set community string
calls up the SNMP Set Community Name menu.
This allows the user to restore the default SNMP set community name or to enter a
new SNMP set community name. The SNMP Set community string is the password
that any SNMP client must use to write settings to the SNMP agent on the MSA
Fabric Switch 6. This name can be any ASCII string desired. The factory default is
“private.”
4. Set SNMP trap community string
calls up the SNMP Trap Community Name
menu. The SNMP Trap community string is the password that any SNMP client must
use to poll the SNMP agent on the MSA Fabric Switch 6 for SNMP traps. This name
can be any desired ASCII string. The factory default is “SNMP_trap.”
To change the SNMP Trap Community string, type the new name at the command
prompt and press the
Enter
key
.
