Initial Configuration of the Switch
2-4
Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: c-ch2 Initial Configuration of the Switch.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 7/17/02 7:46 AM
5.
Set up the properties for the terminal connection.
In Windows NT 4.0:
a.
Double-click the
Hypertrm
icon.
b.
Enter a name for the connection in the
New Connection
dialog box, select an
icon to represent the switch for future use, and click
OK
.
The
Connect To
dialog box is displayed.
6.
From the
Connect using
drop-down menu, select the communications port
assigned to the serial port (for example,
COM1,
COM2
) and click
OK
.
In the
properties dialog box, enter the following port settings and select
OK
.
Table 2-1: Default Serial Port Settings
Type Setting
Bits per second (baud rate)
38,600
Data bits
8
Parity None
Stop bits
1
Flow control
None
7.
Select File
Properties
to show the connection properties dialog box. Select the
Settings
tab. From the
Emulation
pull-down menu,
select
VT100
and click
OK
.
8.
Power ON all peripheral device(s).
9.
Wait at least ten seconds and power cycle the MSA1000. The switch sends a
series of Power-on Self-Test (POST) messages in HyperTerminal.