Command Line Interface
C-34
Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: h-appc Command Line Interface.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 8/7/02 9:39 AM
Variables
Description
ip_address,port number
ip_address
The IP address of the SNMP trap recipient that you
want to create a filter for
port_number
The port number of the SNMP trap recipient that
you want to create a filter for
trap_type
EMer
Filters for traps of the type “Emergency”. Highest
level of severity
Alert
Filters for traps of the type “Alert”.
Crit
Filters for traps of the type “Critical”.
ERr
Filters for traps of the type “Error”.
Warn
Filters for traps of the type “Warn”.
Notify
Filters for traps of the type “Notify”.
Info
Filters for traps of the type “Info”.
Debug
Filters for traps of the type “Debug”.
Mark
Filters for traps of the type “Mark”. Lowest level of
severity.
Traps State = <
ip_address,port_number
> = <
trap_state
>
—
This
command is used to set the state of a particular SNMP trap recipient as active or
inactive. The command variables are defined as follows:
