3-25
Compaq Professional Workstation SP700 Reference Guide
Writer: bj pereira Project: Compaq Professional Workstation SP700 Reference Guide Comments: 320280-001
File Name: D-CH03.DOC Last Saved On: 7/6/98 3:33 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Remote Wakeup and Remote Shutdown
Your workstation has a network card installed that supports the Compaq
Remote Wakeup and Remote Shutdown functions. These functions allow a
system administrator to power on and power off a client workstation from a
remote location, supported by PC LAN management tools.
NOTE
: Third-party software tools are required to remotely distribute
software.
Remote Wakeup allows the network interface controller to continue
functioning, even when power to the workstation has been turned off.
NOTE
: The workstation continues to consume a small amount of electricity
even after you turn it off. Only when you disconnect the power cord from the
electrical outlet does the workstation stop consuming electricity.
To enable Remote Wakeup and Remote Shutdown, follow these steps:
1. Double-click the Network Icon, located in the Control Panel.
2. Double-click the appropriate network controller.
3. Click the Advanced Properties tab.
4. Select
Remote Wakeup.
5. Change the value to ON.
6. Click
OK to save and apply changes, then click OK to exit the Network
dialog.
For more information on using Remote Wakeup and Remote Shutdown, refer to
the online Remote Management Administrators Guide. The Remote
Management Administrators Guide is included with the Remote Management
Administration Tools, and is available in the Support Software CD Kit or at the
Compaq website (
http://www.compaq.com
) in the Compaq Services and
Technical Help area, under Downloadables.
