Compaq PrintNet 5525B, User Manual

Page: 127 / 238

Menu
127
Test Width
Set this parameter to run the self-tests at full width or 80 columns.
Paper Out Dots
This parameter is used to adjust the paper out distance from the
perforation; you can specify where the last line on the page will print
when there is a paper out condition. Setting this parameter correctly
prevents printing on the platen.
CAUTION
Only authorized service representatives should set this parameter.
System Memory
Displays the amount of RAM installed.
Print Statistics
You can view various printer statistics and refer to them for preventive
maintenance purposes. Printer statistics accumulate continuously; they
do not reset when you turn off the printer. All of the printer statistics are
set to zero at the factory after burn-in testing.
•
On. The cumulative time in hours the printer has been powered on.
The range is 0 to 30,000 hours.
•
Print. The cumulative time in hours the printer has actually been
printing. The range is 0 to 30,000 hours.
•
Print Strokes. The cumulative number of back-and-forth shuttle
strokes the printer has printed during normal printer operation. The
range is 0 to 2,147,483,647 shuttle strokes.
•
Print Lines. The cumulative number of lines the printer has printed.
The range is 0 to 2,147,483,647 print lines.
•
11 inch Pages. The cumulative number of pages the printer has
printed. The range in print pages is 0 to 2,147,483,647 total inches
of paper movement divided by 11.