Compaq Presario 5BW Series, Maintenance And Service Manual

Page: 52 / 236

Motions of bench worker 6,000 V 800 V
400 V
Removing DIPS from plastic tubes 2,000 V 700 V
400 V
Removing DIPS from vinyl trays 11,500 V 4,000 V
2,000 V
Removing DIPS from Styrofoam 14,500 V 5,000 V
3,500 V
Removing bubble pack from PCBs 26,000 V 20,000 V
7,000 V
Packing PCBs in foam-lined box 21,000 V 11,000 V
5,000 V
NOTE: 700 volts can degrade a product!
Preventing Electrostatic Damage to Equipment
Many electronic components are sensitive to ESD. Circuitry design and structure determine the degree of sensitivity. The
following proper packaging and grounding precautions are necessary to prevent damage:
Protect all electrostatic parts and assemblies with conductive or approved containers or packaging.
■
Keep electrostatic sensitive parts in their containers until they arrive at static-free stations.
■
Place items on a grounded surface before removing them from their container.
■
Always be properly grounded when touching a sensitive component or assembly.
■
Place reusable electrostatic-sensitive parts from assemblies in protective packaging or conductive foam.
■
Use transporters and conveyors made of antistatic belts and metal roller bushings. Mechanized equipment used for moving
materials must be wired to ground and proper materials selected to avoid static charging. When grounding is not possible,
use an ionizer to dissipate electric charges.
Preventing Damage to Drives
To prevent static damage to hard drives, use the following precautions:
Handle drives gently, using static-guarding techniques.
■
Store drives in the original shipping containers.
■
Avoid dropping drives from any height onto any surface.
■
Handle drives on surfaces that have at least one inch of shock-proof foam.
■
Always place drives PCB assembly side down on the foam.
■
Grounding Methods