Hard Drive Installation
Using SCSISelect with SCSI Devices
The SCSI host adapter includes the SCSISelect utility to configure
the host adapter and to run SCSI disk utilities. To run the SCSISelect
utility:
■
In Post Messages Enabled mode: Press
Ctrl + A
when the
Press <Ctrl><A> for SCSISelect Utility message displays
during POST.
■
In Post Messages Disabled mode: When the Compaq logo screen
displays, press any key to exit the logo screen. Immediately after
exiting the logo screen, press
Ctrl + A
to access the SCSISelect
utility.
A menu displays with the following options:
■
Configure/View Host Adapter Settings
❏
SCSI Bus Interface Definitions
◆
Host Adapter SCSI ID
◆
SCSI Parity Checking
◆
Host Adapter SCSI Termination
❏
Additional Options
◆
Boot Device Options
◆
SCSI Device Configuration
◆
Advanced Configuration Options
■
SCSI Disk Utilities
❏
Lists all SCSI devices and SCSI ID numbers
For additional information about configuring POST message display
status, refer to the Computer Setup Guide on the Reference
Library CD.
Compaq Evo Workstation W6000 Hardware Reference Guide
B-7
