Hardware Upgrades
Preparing for Drive Installation
Remove the drive bezel blank before installing any removable media
storage device, such as a tape drive, CD-ROM or DVD-ROM drive,
or diskette drive, into these bay locations.
Removing the
Bezel Blank
To remove the bezel blank:
1. Shut down the operating system properly, then turn off the
workstation and any external devices.
2. Disconnect the power cord from the grounded AC outlet.
3. Remove the workstation access panel. See “Removing the
Workstation Access Panel” in this chapter.
4. Remove the front bezel. See “Removing the Front Bezel” in this
chapter.
Compaq Evo Workstation W6000 Hardware Reference Guide
2-12
