9
Using Your Sysytem
Logging On
The Auto Logon feature is enabled as a factory default. Use the Specify Logon
Information dialog box to:
•
change the Default User Name
•
change the Default Password
•
enable or disable Auto Logon
The Specify Logon Information dialog may be accessed with the following
special key sequence: Tab, Home, End,
←
,
→
.
After completing this key sequence, the next dialog box to display will be the
Specify Logon Information dialog box. Make one of the following choices:
•
As an Administrator, enter Administrator in both the User Name and
Password fields
•
As a User, enter User in both the User Name and Password fields
The default for the Logon Information dialog box is User.
Note
The passwords are case sensitive. The administrator’s
password is uppercase A followed by all lowercase
characters. The user’s password is uppercase U
followed by all lowercase characters.
Passwords can be changed using Ctrl+Alt+Del | Change Password. For security
purposes it is recommended that the administrator default password be changed.
Time Synchronization
The Dimension 4 time sync application automatically launches each time the
terminal is started. It searches pre-configured time servers in sequence until it
connects and sets the time on the terminal. The application then automatically
exits. If the application cannot connect with a time server within approximately 15
seconds it will time-out and close. The time on the terminal will not be accurate.
