3–6
Hardware Reference Guide
Adding System Memory and Upgrading the Internal Hard Drive
Adding or Removing Memory Modules
5. To install a memory module, press out on both latches
1
of the
DIMM socket at the same time. Match the notch on the module
with the tab on the memory socket.
Firmly
push the module
straight into the socket
2
, ensuring that the module is fully
inserted and properly seated. The latches will close automatically
when the module is seated correctly, securing the module in the
slot
3
.
✎
If only one memory module is used in the system, it must be installed
in the same socket that held the preinstalled memory module.
6. Replace the access panel.
✎
When the personal computer starts up, it will recognize the system
memory upgrade and automatically reconfigure the system.
sp-hrg.book Page 6 Thursday, December 13, 2001 9:14 AM