manualshive.com logo in svg

Compaq d338 - Microtower Desktop PC, Management Manual

Share
Download
Compaq d338 - Microtower Desktop PC Management Manual Download Page 24

20

www.hp.com

Desktop Management Guide

Desktop Management Guide

World Wide Web Site

HP engineers rigorously test and debug software developed by HP 
and third-party suppliers, and develop operating system specific 
support software, to ensure performance, compatibility, and 
reliability for HP computers.

When making the transition to new or revised operating systems, 
it is important to implement the support software designed for that 
operating system. If you plan to run a version of Microsoft Windows 
that is different from the version included with the computer, you 
must install corresponding device drivers and utilities to ensure that 
all features are supported and functioning properly.

HP has made the task of locating, accessing, evaluating, and installing 
the latest support software easier. You can download the software 
from 

http://www.hp.com/support

.

The Web site contains the latest device drivers, utilities, and flashable 
ROM images needed to run the latest Microsoft Windows operating 
system on the HP computer.

Building Blocks and Partners

HP management solutions integrate with other systems management 
applications, and are based on industry standards, such as:

■

Desktop Management Interface (DMI) 2.0

■

Wake on LAN Technology

■

ACPI

■

SMBIOS

■

Pre-boot Execution (PXE) support

Summary of Contents for d338 - Microtower Desktop PC



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands