1-8
Product Features
Compaq Confidential - Need to Know Required
Writer:
Beth Zanca
Part Number:
191009-001
File Name:
d-ch01.doc
Last Saved On:
04/12/00 1:30 PM
Last Saved By:
Lydia Sanchez
Changing from a Desktop to a Minitower Configuration
To change from a desktop to a minitower configuration:
1.
Turn off the workstation and any external devices.
2.
Disconnect the power cord from the grounded AC outlet and the
back of the workstation, then disconnect the network cable from
the system, and any external devices.
3.
Remove the workstation access panel. Refer to Removing the
Workstation Access Panel in Chapter 2.
4.
Remove the front bezel. Refer to Removing the Front Bezel in
Chapter 2.
5.
Disconnect all power and data cables from the drives in the
5.25-inch drive bay.
6.
To release a drive from the 5.25-inch drive bay, slide the drivelock
as shown.
Releasing the drives with the drivelock
7.
While pressing the drivelock button, push from the back of the
drives until the drive casing can be grasped.
8.
While holding the drive casing, pull the drives out of the drive bay.
9.
After placing the workstation in the minitower position, gently
slide the drives back into the bay.
