Compaq Deskpro Workstation AP250 Hardware Reference Guide
1-7
Compaq Confidential - Need to Know Required
Writer:
Beth Zanca
Part Number:
191009-001
File Name:
d-ch01.doc
Last Saved On:
04/12/00 1:30 PM
Last Saved By:
Lydia Sanchez
10.
Remove the subpanel as described in the Removing the Bezel
Blank section in Chapter 2 and reposition the subpanel with the
bezel blank in the proper orientation for the desktop configuration.
CAUTION:
Hold the subpanel straight when you pull it away from the
front bezel. Pulling the subpanel away at an angle could damage the
pins that align it within the front bezel.
Changing from a minitower to a desktop configuration
11.
Replace the subpanel, front bezel, and the workstation access
panel. Be sure the subpanel and front bezel align properly with the
alignment tabs.
✎
When converting from a minitower to a desktop orientation,
use the replacement bezel blank that was shipped with your
workstation to ensure the Compaq logo is properly oriented.
12.
Reconnect the power cord to the grounded AC outlet, then
reconnect the network cable and any external devices to the
system.
