Removing an optical disc when no computer power is available
1.
Insert the end of a paper clip
(1)
into the release access in the front bezel of the drive.
2.
Press in gently on the paper clip until the tray is released, and then pull out the tray
(2)
until it stops.
3.
Remove the disc
(3)
from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE:
If the tray is not fully accessible, tilt the disc carefully as you remove it.
4.
Close the media tray and place the disc in a protective case.
Using the optical drive
11
Summary of Contents for 2710p - Notebook PC
Page 1: ...HP 2700 Ultra Slim Expansion Base User Guide ...
Page 4: ...iv ...
Page 10: ...6 Chapter 2 Docking and undocking ...
Page 25: ......
