HP Array Configuration Utility 49
•
Operating system device names or mount points
Performing a Diagnostics task
1.
Open ACU.
For more information, see "Using the ACU GUI (on page
31
)."
If ACU is already open, click the
Diagnostics/SmartSSD
tab.
The
Diagnostics/SmartSSD
screen appears with the following selections:
o
View SmartSSD Wear Gauge Report
o
Generate SmartSSD Wear Gauge Report
o
Run Array Diagnostic Reports
For this example, use the diagnostic reports selection.
2.
Select
Run Array Diagnostic Reports
.
The array diagnostic report screen appears.
3.
Select a device or devices from the
Report Contents
panel.
The
Available Tasks
panel appears. For more information, see "Diagnostics tasks (on page
48
)."
4.
Click one of the task buttons:
o
If you select
Generate Diagnostic Report
, wait for the report to generate, and then click
Close Report
or
Save Report
.
o
If you select
View Diagnostic Report
, the report appears. When you are finished viewing the current
report, click
Close Report
,
Refresh Report
, or
Save Report
.
o
If you select
View Serial Output Logs
, the log appears. When you are finished viewing the log, click
Close Logs
.
