4-22
Removal and Replacement Procedures
4.13.2
Removing a PCI Expansion Board
1.
Prepare the computer for disassembly (Section 4.2).
WARNING:
Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
2.
Lay the computer down on its large base (side with feet) for greater stability.
3.
Remove the access panel (Section 4.6).
4.
Disconnect any cables from the expansion board, noting their location for reinstallation.
5.
Remove the expansion board retaining screw.
6.
Hold the board at each end and carefully rock it back and forth while pulling upward,
until the connectors pull free from the slot.
Summary of Contents for 133756-004 - Deskpro EN - 6550 Model 6400
Page 103: ...200803 002 201843 001 ...
